Case Study

Development of a Washing Machine Test and Optimisation Platform

Background

Xeros is a technology-led company that has developed a novel approach to improving clothes care by reducing wear and tear during washing. Their technology had already proven successful in industrial and commercial-scale washing machines, but a key strategic objective was to adapt and optimise this innovation for the domestic market.

To support this transition, Xeros aimed to integrate their technology into domestic washing machines and to optimise wash cycles as a means of demonstrating efficacy. They engaged eg technology to develop a controlled, instrumented platform that would enable integration of the technology while supporting detailed analysis and optimisation of consumer wash cycles.

Deep experience in electromechanical system design enabled us to instrument, control and interrogate a complex consumer appliance at subsystem level.

Understanding a Complex System

Domestic washing machines are highly dynamic systems, and the precise behaviour of a washing cycle, particularly aspects such as load balancing and motor control, is often poorly understood. For the client, this lack of visibility limited their ability to tune and validate washing cycles that would maximise the benefits of their technology.

Initially, eg technology was engaged to deliver an instrumented washing machine capable of recording and measuring critical parameters throughout a wash cycle. Building on the success of this work, the client then asked eg to develop a controllable development platform that could act as a robust test bed for optimising washing machine cycles around their technology.

In addition to developing the controllable platform, we were tasked with designing a new door seal to ensure the polymer process media remained contained within the machine whilst avoiding entrapment within the seal itself. This presented a complex dynamic challenge, as the drum operates with multiple degrees of freedom. To support the use of the polymer media within the system, the rear of the washing machine was also modified to incorporate dedicated compartments, together with a mechanism that enabled controlled release and recovery of the polymer media at key stages of the washing cycle.

As a result, the seal needed to move compliantly with the drum, maintain an effective barrier to prevent the process media from passing through and isolate vibrations and forces so they were not transmitted to the chassis, all whilst operating across a wide range of rotational speeds. In parallel, work was undertaken to seamlessly integrate the display into the fascia, alongside the implementation of sensors.

Key requirements included detailed, real-time data capture, flexible control of wash programmes and a solution that could evolve alongside the client’s ongoing development activities.

Xeros
By combining real‑time measurement with flexible embedded control, we transformed a domestic washing machine into a powerful development and optimisation platform.
Xeros
Xeros

Designing a Flexible Development Platform

eg technology assembled a cross-disciplinary team with expertise in software, electronics and system integration. The project centred on instrumenting a domestic washing machine to capture motor movement, water usage and temperature throughout each cycle, with all data logged and streamed in real time to a connected PC.

To move beyond observation and enable true optimisation, the system was then enhanced with embedded control electronics and a Raspberry Pi. This allowed the washing machine to be driven programmatically, with wash cycles defined and modified through scripts rather than fixed control logic.

After evaluating several architectural approaches in close collaboration with the client, eg technology recommended embedding a scripting engine within the system. This provided the flexibility needed to define, repeat and adjust washing behaviours with precision, enabling rapid experimentation and iteration without hardware rework.

A user interface was developed to visualise data and system behaviour, creating a clear link between machine actions and performance outcomes.

Our script‑driven architecture gave the client the freedom to explore,
repeat and optimise wash cycles without hardware redesign.

A Platform for Ongoing Innovation

The final outcome was a robust development system that gave the client unprecedented visibility into washing machine behaviour, along with the control needed to optimise cycles for their technology.

This platform now enables the client to refine performance, demonstrate value to appliance partners, and accelerate the transition of their solution into the domestic market.

By delivering a flexible, script-driven test environment, eg technology supported the client in moving from early-stage experimentation to a repeatable, scalable development capability. The collaborative and client-focused approach ensured the solution aligned closely with commercial goals while remaining adaptable to future needs.

Xeros Display

“eg technology stood out from other consultancies through their collaborative approach, ease of working and ability to quickly understand both the technical challenges and wider commercial objectives of our project. Their breadth of multidisciplinary expertise, combined with a pragmatic and solutions-focused approach, gave us the confidence to tackle complex engineering challenges and progressively expand the scope of our collaboration. Together, we have developed a unique platform that provides enhanced insight into and control over washing machine behaviour, unlocking a level of wash cycle development and optimisation capability not typically accessible within the industry. This is a significant capability for Xeros, enabling us to maximise the performance of our technology while helping our manufacturing partners unlock its full potential and enhance their own product offerings. Throughout the project, eg technology have demonstrated the technical expertise, flexibility and commitment that make them a genuinely valuable development partner.”

Thomas CobbTechnical Director | Xeros

“This project was a great example of applying electromechanical engineering to unlock insight from a complex consumer appliance. By instrumenting and controlling the washing machine at a subsystem level, we were able to capture meaningful motor, water and thermal data while introducing a flexible, script-driven control architecture. The resulting platform gave our client a powerful environment to understand real machine behaviour and to iteratively optimise wash cycles around their technology.”

Rouzet AgaibyDirector | eg technology
Xeros

Are you ready to develop your product or idea?

For further information on how eg technology can support in getting your technology or ideas to market or to chat with one of the eg team about your product design and development requirements, please get in touch.

Get Started